- This wiki is out of date, use the continuation of this wiki instead
Coordinatenumber flags
From FenixWiki
(Difference between revisions)
Revision as of 00:28, 3 May 2007
Definition
Coordinatenumber flags are used to set which scroll or mode_7 coordinate system should display a process, by assigning them to the local variable cnumber of that process. This only has influence on scrolls or mode_7 coordinate systems, not on the screen's coordinate system.
How to change the used coordinate system, see ctype.
| Constant | - Value | - Description | C_0 | - 1 | - Display the process in the scroll/mode_7-view with ID 0 |
| C_1 | - 2 | - Display the process in the scroll/mode_7-view with ID 1 | |||
| C_2 | - 4 | - Display the process in the scroll/mode_7-view with ID 2 | |||
| C_3 | - 8 | - Display the process in the scroll/mode_7-view with ID 3 | |||
| C_4 | - 16 | - Display the process in the scroll/mode_7-view with ID 4 | |||
| C_5 | - 32 | - Display the process in the scroll/mode_7-view with ID 5 | |||
| C_6 | - 64 | - Display the process in the scroll/mode_7-view with ID 6 | |||
| C_7 | - 128 | - Display the process in the scroll/mode_7-view with ID 7 | |||
| C_8 | - 256 | - Display the process in the scroll/mode_7-view with ID 8 | |||
| C_9 | - 512 | - Display the process in the scroll/mode_7-view with ID 9 |
